Testosterone Cypionate Carrier Oils - Differences

Buy Lab Tests Online
Status
Not open for further replies.
So are you ending up with cypionate or a different ester?

The ester (
cypionate, acetate, propionate, enanthate, undecanote etc) is dissolved in the carrier oil (gso, cso, Migyol etc). The oil does not change the ester.
**************************************************************************************************

Does using Migyol change the rate of cleavage/half life of the end product or does the half life remain the same?

The
pharmacokinetics remain the same. Migyol does not go rancid as easily as the plant based oils do, giving a longer shelf-life.
**************************************************************************************************

And, any speculation why the compounding pharms haven't caught on?

Migyol 840 is very expensive users don't want to pay high prices.
Any compounding pharmacy can substitute Migyol 840, because of the high cost they reserve it for patients with allergies.

It is the ideal carrier. It's viscosity is on par with water it room temperature so you can use 29 or 31 gauge syringes for draw and injections. Its high iodine number allows for very high concentrations of solution e.g. 500mg/ml.

Just ask for it.



 
Defy Medical TRT clinic doctor

Vitalii

New Member
Use Miglyol 840. It works very well.


Using Miglyol 840 as a carrier makes most injections pain free.


Miglyol 840 has a viscosity of 9-12 at 60ºF, cottonseed oil 33.5, grape seed oil 31.6 and peanut oil 39.6.

Miglyol 840 has an iodine value of 0.5 max. For comparison cottonseed oil has a ~110, grape seed oil 124-144, peanut oil has a 83-100 iodine value.


For those of you without a back ground in chemistry a 0.5 iodine valve means a high polarity and superior solvent characteristics for active drugs. So your hormones will stay in solution at a much higher concentration enabling high mg/ml low volume dosing. The low viscosity means it will flow like water at room temperature even at high concentrations allowing your to use high gauge needles. Migyol 840 is an excellent carrier.

www medlabgear com/shop/usp-oils/miglyol-840/

Good day, need help in cooking steroids preparation. Interested in the question of which is better to use, purely miglyol840, or use a mixture of ethyl oleate + miglyol840 .
Use Miglyol 840. It works very well.


Using Miglyol 840 as a carrier makes most injections pain free.


Miglyol 840 has a viscosity of 9-12 at 60ºF, cottonseed oil 33.5, grape seed oil 31.6 and peanut oil 39.6.

Miglyol 840 has an iodine value of 0.5 max. For comparison cottonseed oil has a ~110, grape seed oil 124-144, peanut oil has a 83-100 iodine value.


For those of you without a back ground in chemistry a 0.5 iodine valve means a high polarity and superior solvent characteristics for active drugs. So your hormones will stay in solution at a much higher concentration enabling high mg/ml low volume dosing. The low viscosity means it will flow like water at room temperature even at high concentrations allowing your to use high gauge needles. Migyol 840 is an excellent carrier.

www medlabgear com/shop/usp-oils/miglyol-840/

Good day, need help in cooking steroids preparation. Interested in the question of which is better to use, purely miglyol840, or use a mixture of ethyl oleate + miglyol840 .
 
I find that miglyol840 is much better but some time there is slight crystallization (crashing). This is easily fixed with a warm water bath. The mixture of ethyl oleate + miglyol840 solves this "problem" as the eo acts interferes with the crystallization. For personal use miglyol840 is the better choice. For resale ethyl oleate + miglyol840 will keep your customers happy. Many of them will to understand that the slight crystallization occurs because the product was made with pure and high quality ingredients. They will think the product is of low quality and is failing to stay in solution for that reason. Note that generally massive recrystallization of the result of pure temperature control, a poor formulation, low quality reagents, sloppy lab work and finishing or a combination of them. Very slight recrystallization is an indication of high purity.
 

Vitalii

New Member
Skills at home are 812,840 miglyol and eiloleat, doing experiments. I noticed that when the varish840 turns out to be a crystal clear product, when adding ethyloleate it becomes neither so transparent. .cooking temperature 120s, has long noticed often been a product with a light brown sediment while still cooking in regular oil. You wrote that on a pure basis, 840 is better, but are there crystals if you add 10% benzyl benzoate and 2% benzyl alcohol as a preservative? .It is very interesting to know on what basis does alpha-pharma?
I find that miglyol840 is much better but some time there is slight crystallization (crashing). This is easily fixed with a warm water bath. The mixture of ethyl oleate + miglyol840 solves this "problem" as the eo acts interferes with the crystallization. For personal use miglyol840 is the better choice. For resale ethyl oleate + miglyol840 will keep your customers happy. Many of them will to understand that the slight crystallization occurs because the product was made with pure and high quality ingredients. They will think the product is of low quality and is failing to stay in solution for that reason. Note that generally massive recrystallization of the result of pure temperature control, a poor formulation, low quality reagents, sloppy lab work and finishing or a combination of them. Very slight recrystallization is an indication of high purity.
Skills at home are 812,840 miglyol and eiloleat, doing experiments. I noticed that when the varish840 turns out to be a crystal clear product, when adding ethyloleate it becomes neither so transparent. .cooking temperature 120s, has long noticed often been a product with a light brown sediment while still cooking in regular oil. You wrote that on a pure basis, 840 is better, but are there crystals if you add 10% benzyl benzoate and 2% benzyl alcohol as a preservative? .It is very interesting to know on what basis does alpha-pharma?
 

Vitalii

New Member
I find that miglyol840 is much better but some time there is slight crystallization (crashing). This is easily fixed with a warm water bath. The mixture of ethyl oleate + miglyol840 solves this "problem" as the eo acts interferes with the crystallization. For personal use miglyol840 is the better choice. For resale ethyl oleate + miglyol840 will keep your customers happy. Many of them will to understand that the slight crystallization occurs because the product was made with pure and high quality ingredients. They will think the product is of low quality and is failing to stay in solution for that reason. Note that generally massive recrystallization of the result of pure temperature control, a poor formulation, low quality reagents, sloppy lab work and finishing or a combination of them. Very slight recrystallization is an indication of high purity.

if you can, please give me your mail so that I can write in person.
 

madman

Super Moderator
Good day, need help in cooking steroids preparation. Interested in the question of which is better to use, purely miglyol840, or use a mixture of ethyl oleate + miglyol840 .


Good day, need help in cooking steroids preparation. Interested in the question of which is better to use, purely miglyol840, or use a mixture of ethyl oleate + miglyol840 .


How did this thread turn into home brewing steroids?

This is a men health/trt forum!

Have some respect!
 
Status
Not open for further replies.
Buy Lab Tests Online

Sponsors

bodybuilder test discounted labs
Defy Medical TRT clinic
nelson vergel coaching for men
Discounted Labs
TRT in UK Balance my hormones
Testosterone books nelson vergel
Register on ExcelMale.com
Trimix HCG Offer Excelmale
Thumos USA men's mentoring and coaching
Testosterone TRT HRT Doctor Near Me
how to save your marriage

Online statistics

Members online
6
Guests online
6
Total visitors
12

Latest posts

Top